10 semiconductor process integration experts
Process integration titles run through this group at five companies: three TSMC section managers, three Intel integration roles, two GlobalFoundries directors, and one manager each at Micron Technology and SSMC. Their work covers memory, BEOL, BCD and embedded flash, plus the move from development into volume manufacturing, so they suit a fab or chip team planning a technology transfer or a yield ramp.
Professionals to explore
Abhishek Jain
LinkedInExperience: Process Integration Manager · Intel
$269 per 30-minute call
Principal Engineer at Qualcomm since 2022, Abhishek Jain was Process Integration Manager at Intel (2022) after Process Integration Staff (2017-2022), Device Staff (2014-2017) and Process Development Staff (2012-2014) there. Jain describes work on 3DIC, heterogeneous integration and nodes from 65 nm to 14A, from pathfinding research to yield and performance improvement.
Is this you? Claim your profile and get paid for calls.
Dave Evans
LinkedInExperience: Process Integration Engineer · Intel
$169 per 30-minute call
Intel 18A is the node in one of Dave Evans's two current Engineering Manager titles at Intel (since 2016 and since 2024), described as Process Integration Group Leader for Intel 18A; Evans has also been Process Integration Engineer there since 2009. Senior Process Engineer (2003-2009) and Process Engineer (2000-2003) at Intel are earlier, a fit for questions on leading integration for a new Intel node.
Is this you? Claim your profile and get paid for calls.
Jianbo Yang
LinkedInExperience: Senior Manager, Process Integration · Systems on Silicon Manufacturing Company Pte Ltd (SSMC)
$235 per 30-minute call
Jianbo Yang has been Senior Manager, Process Integration at Systems on Silicon Manufacturing Company Pte Ltd (SSMC) since 2016, after Member of Technical Staff, TD Integration Engineering at GlobalFoundries (2009-2016). Yang's doctoral research covered device characterization and reliability simulation and modeling, which suits questions on reliability qualification during integration.
Is this you? Claim your profile and get paid for calls.
Jin Lu
LinkedInExperience: TD Process Integration Engineering Manager (Director Level) · Intel
$438 per 30-minute call
Volatile and non-volatile memory are the process integration areas Jin Lu describes skill in, for research and development work. Lu has been TD Process Integration Engineering Manager (Director Level) at Intel since 2019, following Principle Engineer - TD Process Integration at Micron Technology (2004-2019), a fit for memory integration questions.
Is this you? Claim your profile and get paid for calls.
Lucy Wei
LinkedInExperience: Former Section Manager, Process Integration · TSMC
$235 per 30-minute call
Pathfinding, technology development, transfer and high-volume manufacturing are the stages Lucy Wei describes working across. Wei has been Snr Director, Advanced Technology Head of Process Integration at Technology Development since 2022, after Senior Manager, Process Integration & Strategic Program Management at Micron Technology (2018-2022) and Section Manager, Process Integration at TSMC (2014-2018), and was Team Lead, Process Integration & Product Engineering at GlobalFoundries (2008-2014).
Is this you? Claim your profile and get paid for calls.
Madhusudan Mukhopadhyay
LinkedInExperience: Director & Head of Integration · GlobalFoundries
$505 per 30-minute call
For 40-130nm BCD/BCD lite, NVM, RF and automotive technologies, Madhusudan Mukhopadhyay describes a process integration remit as Director & Head of Integration at GlobalFoundries since 2015, along with a team across Singapore and India and bringing technologies into volume manufacturing. Mukhopadhyay was Director Technical Director & Head of Technology Development at Systems on Silicon Manufacturing Company Pte Ltd (SSMC) (2011-2015).
Is this you? Claim your profile and get paid for calls.
Michael Premsagar
LinkedInExperience: Director, BEOL Process Integration · GlobalFoundries
$606 per 30-minute call
How integration and module engineering teams split work is a natural question for Michael Premsagar, Director, BEOL Process Integration at GlobalFoundries since 2024, who also held Director, Module Engineering (2022-2025), Deputy Director, Module Engineering (2018-2022) and Senior Manager, Process & Equipment Engineering (2015-2018) there. At IBM, Premsagar was Senior Engineering Manager, Ion Implant and PVD (2014-2015).
Is this you? Claim your profile and get paid for calls.
Raynaldi Yose Iskandar
LinkedInExperience: Process Integration Section Manager · TSMC
$235 per 30-minute call
Raynaldi Yose Iskandar's four TSMC titles are Process Integration Section Manager since 2026, Principal Process Integration Engineer (2024-2026), Senior Process Integration Engineer (2022-2024) and Process Integration Engineer (2021-2022). That progression within one foundry's integration group makes Iskandar a fit for questions on how integration engineers are developed and what a section manager owns.
Is this you? Claim your profile and get paid for calls.
Regan Tsui
LinkedInExperience: Foundry Program Manager · Intel; Former Process Integration Manager · Micron Technology
$269 per 30-minute call
Foundry Program Manager at Intel since 2022, Regan Tsui describes integration, yield enhancement and defect analysis from R&D to pilot line to high volume manufacturing. Micron Technology titles were Process Integration Manager (2009-2014) and R&D Process Integration Engineer (2014-2016), then Senior Process Integration Engineer at Samsung Austin Semiconductor (2016-2021) and Principal Integration Technical Lead at Skorpios Technologies, Inc. (2021-2022).
Is this you? Claim your profile and get paid for calls.
WeiChu Wang
LinkedInExperience: Process Integration Section manager · TSMC
$235 per 30-minute call
Test and yield questions suit WeiChu Wang, Process Integration Section manager at TSMC since 2021, after Principal Engineer there (2006-2021). Wang lists foundry cross-team integration, new technology development, wafer accept testing (WAT) and related process analysis, product yield improvement, new IC tape out and SPICE model setup, along with a 40nm embedded flash project.
Is this you? Claim your profile and get paid for calls.
Choose the right perspective
For moving a technology into volume manufacturing, Lucy Wei, Madhusudan Mukhopadhyay and Regan Tsui describe that transfer directly. Memory integration points to Jin Lu, back-end-of-line questions to Michael Premsagar, and day-to-day yield and test analysis at a foundry to WeiChu Wang; Dave Evans and Abhishek Jain fit questions on advanced nodes at Intel.
Questions to take into the conversation
- 01What has to be frozen in a process flow before a new technology is handed from development to the high-volume fab?
- 02How do you divide yield problems between process integration and the individual module teams?
- 03Which electrical test and reliability results do you need before customers can tape out on a new process?
About this directory
This is a professional research starting point based on business profile data retrieved on . Titles and companies reflect that source snapshot; roles marked former had ended by then. Check the linked profiles for current details. Inclusion does not imply Instant Expert membership or availability.