10 metrology and quality inspection experts

Metrology lab managers, CMM managers and metrology supervisors sit side by side here: three hold or held Metrology Lab Manager titles, at Emerging Advanced Products, Cummins and PTI Engineered Plastics, and five have CMM in a job title. Talk to them before buying a CMM or scanner, setting up a dimensional lab, or deciding how much inspection belongs on the shop floor versus in the lab.

10 professionals10 companiesData retrieved October 4, 2026

Professionals to explore

  1. Anthony Sanutelli

    LinkedIn

    Experience: Metrology Lab Manager · Emerging Advanced Products LLC.

    $101 per 30-minute call

    Hands-on questions on CMM and laser scanner setups suit Anthony Sanutelli, who programs and operates dual and single arm CMMs, FARO arm laser scanners and reverse engineering tools. Anthony was Metrology Lab Manager at Emerging Advanced Products LLC. (2015–2021) and holds two current titles at DTI (Diversified Technology Inc.): Metrology manager since June 2021 and Manager of Quality and Conformance since December 2021. Anthony was also a CMM Technician at Quality Metal Craft Inc (2012–2015) and CMM Coordinator at Moeller Aerospace (1998–2012).

    Is this you? Claim your profile and get paid for calls.

  2. Armondo Delgado

    LinkedIn

    Experience: Metrology Lab Manager · PTI Engineered Plastics

    $101 per 30-minute call

    Measuring parts against complex design intent is the topic for Armondo Delgado, Metrology Lab Manager at PTI Engineered Plastics since July 2026 after Metrology Engineer there (2014–2026). Armondo was also Lab Manager CMM Prgrammer at Espas Inc. (2011–2014), Senior Metrologist at Dimensional Measurement Inc. (2011) and CMM Programmer at Eclipse Mold Inc (2010–2011), with work across aerospace, medical device, automotive and military manufacturing.

    Is this you? Claim your profile and get paid for calls.

  3. Dan Logan

    LinkedIn

    Experience: Former Sr. Metrologist III - Metrology Manager Quality Engineer · Isometric Micro Molding - Nissha Medical Technologies

    $135 per 30-minute call

    In December 2025 Dan Logan became Metrology Manager at SMC Ltd, after Sr. Metrologist III - Metrology Manager Quality Engineer at Isometric Micro Molding - Nissha Medical Technologies (2015–2025), where Dan directed the CT scanning and Metrology departments. Dan describes scaling metrology departments from the ground up, and earlier was Mold Design Wire EDM Operator Wire EDM Director at the same company (2001–2015). The one to ask about CT scanning and building a metrology department for micro molded parts.

    Is this you? Claim your profile and get paid for calls.

  4. Hardik Shukla

    LinkedIn

    Experience: Head, Metrology · Schaeffler

    $269 per 30-minute call

    Hardik Shukla has been Head, Metrology at Schaeffler since May 2014, heading the central metrology lab and coordinating with the other measuring rooms, after Sr. Executive, Research & Development at Schaeffler (2010–2014). Hardik was also Sr. Engineer, CQA at Harsha Engineers International Limited (2006–2010) and Assistant Quality Assurance at Deluxe Bearings Limited (2002–2003), and is based in Vadodara, India. Fits questions on running one central lab alongside several measuring rooms.

    Is this you? Claim your profile and get paid for calls.

  5. Jalen Ulrey

    LinkedIn

    Experience: Former Dimensional Metrology Lab Manager · Cummins Inc.

    $203 per 30-minute call

    Since July 2022, Jalen Ulrey has been Dimensional Metrology Lab Manager at Cummins Inc., after Senior Engineer - Metrology and Calibration at Faurecia (2019–2022). Jalen's earlier Faurecia titles were Materials Engineer (2016–2019), Materials Laboratory Technician (2015–2016) and Engineering Intern (2012–2015). The metrology and calibration engineering title plus a dimensional lab manager role make Jalen a fit for questions on lab calibration and dimensional measurement.

    Is this you? Claim your profile and get paid for calls.

  6. Jeff Wioskowski

    LinkedIn

    Experience: Former Corporate Metrology Manager · Cadence Innovation

    $169 per 30-minute call

    Meeting automaker measurement requirements as a supplier is where Jeff Wioskowski fits. Metrology Supervisor at Faurecia since 2011, for a Tier 1 supplier of automotive components, Jeff has worked with GM, Chrysler and Ford on numerous programs, and was Corporate Metrology Manager at Cadence Innovation (2001–2010), CMM Programmer Operator at UNOVA (1994–2001) and a Lab Assistant at Turchan Inc. (1992–1994).

    Is this you? Claim your profile and get paid for calls.

  7. Joshua McPherson

    LinkedIn

    Experience: CMM Manager · JR Automation

    $135 per 30-minute call

    At JR Automation, Joshua McPherson has been CMM Manager since June 2024, a title also held there from 2017 to 2022, managing the CMM department and its daily schedule with Hexagon Romer Arms and Leica Laser Tracker using PolyWorks Inspection Software. Joshua was also Metrology Manager at Specialty Tooling Systems, Inc. (2023–2024), Portable CMM Arm Specialist Sales Engineer at Hexagon Manufacturing Intelligence (2022–2023) and CMM Programmer 3D Scanner Manager at Haven Metrology (2013–2017). Fits questions on scheduling and staffing a CMM department.

    Is this you? Claim your profile and get paid for calls.

  8. Juan Del Rio

    LinkedIn

    Experience: Metrology Manager · Wisconsin Metal Parts

    $101 per 30-minute call

    Juan Del Rio has been Metrology Manager at Wisconsin Metal Parts since April 2016 and holds ASME certification as a GD&T Professional, Senior Level. Juan was also Quality Assurance Manager at Fusion Babbitting Co., Inc. (2013–2016), Supplier Quality Engineer Quality Engineer at Vulcan Global Manufacturing Solutions (2010–2013), Quality Metrology Manager at Instrument Development Co. (2000–2010) and an Inspector at Rexnord Stearns (1995–1997). Suited to GD&T interpretation and supplier quality questions.

    Is this you? Claim your profile and get paid for calls.

  9. Komel McGehee

    LinkedIn

    Experience: Metrology & Inspection Manager · Divergent

    $203 per 30-minute call

    Choosing between CMM, scanning and portable inspection is a good question for Komel McGehee, Metrology & Inspection Manager at Divergent since October 2025 and Lead CMM Programmer there since April 2025, after Senior CMM Programmer Dept Supervisor at Brek Manufacturing Company (2005–2025). Komel works in aerospace and high-precision manufacturing, leading end-to-end inspection operations across CMM, automated 3D scanning and portable metrology systems.

    Is this you? Claim your profile and get paid for calls.

  10. Tim Ruland

    LinkedIn

    Experience: Metrology Supervisor · Hitchiner Manufacturing

    $101 per 30-minute call

    Tim Ruland has been Metrology Supervisor at Hitchiner Manufacturing since October 1990 and also works as a Metrology Engineer, providing expertise to specific projects within metrology. Based in Milford, New Hampshire, Tim has held the same metrology seat at one manufacturer for decades, which makes Tim a fit for questions on keeping a lab's methods consistent over many years.

    Is this you? Claim your profile and get paid for calls.

Choose the right perspective

For building a lab or department from nothing, Dan Logan describes scaling metrology departments from the ground up, and Hardik Shukla heads a central metrology lab that coordinates with other measuring rooms. Joshua McPherson and Komel McGehee are the picks for CMM programming, portable arms, laser trackers and 3D scanning; Juan Del Rio holds an ASME GD&T Professional certification at senior level, and Jeff Wioskowski has worked on GM, Chrysler and Ford programs as a metrology supervisor.

Questions to take into the conversation

  1. 01Which parts should be measured on a CMM in the lab and which can be checked with portable arms or scanners on the shop floor?
  2. 02How should CMM programs and inspection plans be written so a new part reaches production without the lab becoming the bottleneck?
  3. 03What calibration and gauge control routine keeps a metrology lab's results trusted by customers and auditors?

About this directory

This is a professional research starting point based on business profile data retrieved on . Titles and companies reflect that source snapshot; roles marked former had ended by then. Check the linked profiles for current details. Inclusion does not imply Instant Expert membership or availability.

Other perspectives in Industrial automation